Biollay Spezialbau AG
Bern
Yesterday
PRODUCT DATA SHEET BSB-CT maxifirm
- Publication date:01 November 2025
- Workload:100%
- Contract type:Unlimited employment
- Place of work:Bern
Job summary
Biollay Spezialbau AG specializes in high-strength concrete solutions.
Tasks
- They produce BSB-CT maxifirm for various flooring applications.
- These concretes are ideal for high-load areas both indoors and outdoors.
- BSB-CT maxifirm offers durability with resistance to moisture and frost.
Skills
- ISO 9001, ISO 14001, and ISO 45001 certified company.
- Experience in concrete technology and applications.
- Knowledge of construction and flooring standards.
Is this helpful?
About the job
Biollay Spezialbau AGPhone 031 533 55 44
ISO 9001
Rehhagstrasse 3 info@biollay-spezialbau.ch ISO 14001
3018 Bern www.biollay-spezialbau.ch ISO 45001
VAT No. CHE-114.920.195
PRODUCT DATA SHEET
BSB-CT maxifirm
Hard concrete
BSB-CT maxifirm hard concretes consist of the binder cement, aggregate, water, and concrete additives. They are suitable for the production of all cement-resin coatings according to SIA 567 252 (floor coverings made of cement, magnesia, synthetic resin, and bitumen) for indoor and outdoor use. By adding steel fibers, the technical properties of BSB-CT maxifirm hard concrete can be positively influenced. BSB-CT maxifirm hard concrete achieves most of its final strength already 7 days after installation. Properties
- mineral
- high strength
- highly moisture resistant
- high frost resistance
- high wear resistance
- vapor permeable
- non-combustible
- good grip
- versatile use
- seamless in combination with substructure
- early loadable
BSB-CT maxifirm hard concretes can be used both indoors and outdoors. They are to be used wherever high loads are expected (e.g., in commercial rooms, areas with industrial use, technical rooms, garages, parking garages, ramps, balconies, etc.). BSB-CT maxifirm hard concretes are installed bonded and usually as visible coverings. BSB-CT maxifirm hard concretes can also be installed as a base layer for synthetic resin coatings or paints. Additives
The technical properties of BSB-CT maxifirm hard concretes can be influenced in various ways. By adjusting the cement content and adding concrete additives, both drying and technical values such as adhesion and compressive strength can be influenced. Various technical values can also be improved by mixing in steel fibers. By incorporating special hard grains into the surfaces, these become even more wear-resistant. In addition, this can influence the coloring. High strengths
In the hardened state, usually after 28 days, BSB-CT maxifirm hard concretes have high strength. They show high resistance to various aggressive liquids such as mild acids, alkalis, benzols, etc. Notes
BSB-CT maxifirm hard concretes must be protected from drying out too quickly. They must not be exposed to drafts during the first 21 days after installation. BSB-CT maxifirm hard concretes can also be colored and/or ground with appropriate pigments. These are facts that make them extremely attractive for construction projects. Biollay Spezialbau AG - a company of the FS Group Version 2/2019
Page 1 of 2
Biollay Spezialbau AG
Phone 031 533 55 44
ISO 9001
Rehhagstrasse 3 info@biollay-spezialbau.ch ISO 14001
3018 Bern www.biollay-spezialbau.ch ISO 45001
VAT No. CHE-114.920.195
Where aesthetics play a role, it is recommended to treat the surfaces of BSB-CT maxifirm hard concretes with impregnations or sealants - coordinated with the expected loads. This guarantees a long-term unchanged surface and facilitates maintenance cleaning. Biollay Spezialbau AG - a company of the FS Group Version 2/2019
Page 2 of 2
