Creating new space for charging
EVTEC AG
Kriens
Key information
- Publication date:29 October 2025
- Workload:100%
- Contract type:Unlimited employment
- Place of work:Kriens
Job summary
Introducing a cutting-edge charging solution for vehicles. Ideal for tight spaces like garages and bus depots.
Tasks
- Designing flexible power arrangements for efficient charging.
- Ensuring user-friendly operation via automated systems.
- Maintaining high safety standards during charging processes.
Skills
- Experience in electrical engineering or related fields.
- Knowledge of DC charging systems and standards.
- Strong problem-solving and technical skills.
Is this helpful?
Creating new space for
charging
The more flexible arrangement of the power and control The housing of the output terminal was designed to be elements of this charging solution resulted from the requimounted on the ceiling. The charge level of the connected rements in bus and truck garages. Due to the close arranbattery is large and clearly visible from afar. Therefore gement of the fully occupied parking spaces, there is no there are no user functions at the output terminal, charfloor space for free-standing charging stations available, ging starts automatically after plugging in if the connection while the parking time should be utilized to recharge and safety check with the vehicle have been successful. If the vehicles. The control technology is placed above the additional user guidance is desired, this could be done via parking vehicles, the power technology in a more remote a connected computer or a screen for the operators (HMI). technical service space.
Charging solution for parking spaces of trucks, busses or
S p cars lit arc hi
The solution is therefore useful for all vehicle fleets that need tec C ture to be charged quickly when space is scarce, especially ei lin in basements, garages or other spatial situations that do g m not have enough space for assigning additional "publicly" o u n t accessible quick charging stations. Sta tus ind ica tor
Ind us tria l u se
- Bricco Corretto system
- The housing parts of the bricco&charge are industry standard, easily accessible and repairable or replaceable in the event of accidents or damage. The interconnection of up to two bricco&charge output terminals with a corretto&charge power cabinet enables outputs of up to 2 x 192kW and charging voltages of 200 to 920V. CCS
Typ 2 plug
Stecker
Stecker
Dose (optional)
Chargerbricco&charge
Application-optimized
DCplug
CCS-Type2,IEC62196-3
DCchargepower
192kW
DCsafety
Shortcircuitprotected,Overcurr.circuitbreaker, solution Over-voltageprotection,Low-voltageprotection, Isolationmonitoring,Earthmonitoring DCoutputcurrent
200A
DCchargecableaircooled
CCS2:300APeak
200Acontinuouscurrent
The Bricco Corretto system is created at our develop- DCoutputvoltage 150-920VDC ment and production site in Kriens-Obernau. With regard DCinput
HV+,HV- 2xHV+,2xHVwitheachmax.150mm2 to safety and product quality, it corresponds to European maximalvoltagedroponinputlines3V ACgridconnection
L,N,PE,230V-10%,50/60Hz standards and the experience from these special applica- ACgridcurrent 6A
CombinedChargingSystem
DIN70121,ISO15118,PlugIEC62196-3 tions is continuously incorporated into the product. The (CCS2)
Variants
1in1:CCS2 charging solution has been tried and tested for everyday othervariantsonrequest chargecable cablelength:standard5m use and can be accessed by us via remote maintenance. Screen/HMI
10-segmentRGBstatusindication stateofchargeandsystemstateinrealtime On request, it can be professionally maintained on site by Communication/interface
OCPP1.5,OCPP1.6,OCPP2.0(ready),JSON/SOAP, Ethernet-Port,GPRS,UMTS,LTE our team. Environment/Vandalisms
IP54andIK08
Operatingtemperature
-20°Cupto+45°C
Storage
-40°Cupto+85°CwithRF5%bis95%(noncondensing) Nax.noiselevel
45dB(A)in1m
EMC
EN61000-6-1,-2,-3,-4
Conformity
EN61851-1,-22,-23;EN62479;EN55011+A1 Overvoltage
Incorretto&chargetype2+type3/ClassI Optional:type1+type2+type3/ClassI+ClassI Efficiency
98%(@500V)
- Up to 100m distance from plug to power cabinet 99%(@920V)
Mounting
Ceiling
Wal-mount
- Easy to read status indication Dimensions(DxWxH)
259x446x600mm(withoutcable)
- Network based communiaction Weight
25kg
Altitude max2000metersabovesealevel Suitablepowercabinet corretto&charge EVTEC AG
Phone: +41 41 260 88 38
E-Mail: E-Mail schreiben
Web: www.evtec.ch
Up to 384kW DC charge power
Up to 2x 192kW DC charge
High power charger with up to 64kW DC, including
Plug&play 20kW DC + 22kW AC with distributed architectureand power with distributed 384kW DC and voltages up to dynamic power charge, charge. Optional version with minimal footprint for dispenser. architecturefor depot 920V.Charge 3 vehicles
Charge 3 vehicels
1000 V,available with all applications. simultaneously. simultaneously. DC-plugs.
