Charging in confined spaces
EVTEC AG
Kriens
Key information
- Publication date:29 October 2025
- Workload:100%
- Contract type:Unlimited employment
- Place of work:Kriens
Charging in confined spaces
The most flexible arrangement of power terminals
The housing of the distribution terminal has been developed for ceiling mounting; the detection and distribution of this charging solution derives from the requirements of bus and truck garages. Due to the close arrangement of parking spaces, the space for charging columns is reduced, but the battery charge state detection of the connected battery is large and clearly visible from afar. The release functions on the distribution terminal exploit the longer parking time to charge the vehicles, meaning that charging starts automatically after plugging in without having to designate specific charging spaces. The distribution terminal is placed above the vehicles; the power technology is located in a technical room not reserved for parking.
If additional operational guidance is desired, a connected computer or a screen control device can be used.
Charging solution for
Bus, truck, or car parking
This means the solution is also useful for fleets of cars that need to be charged quickly in confined parking situations, especially in underground garages or other spatial situations that do not offer enough space for additional fast charging stations, as is usually the case with public charging stations.
At the
- industrial
Bricco-Correct-System tria
The parts of the bricco&charge housing comply with industrial standards, are easily accessible and repairable or, in case of accidents or damage, also easily replaceable. The interconnection of up to two bricco&charge distribution terminals with a correct&charge electrical panel allows a power of up to
2x 192kW and charging voltages from 200 to 920V.
CCS
CHAdeMO
Type 2
Connector
Plug
Plug
Socket (optional)
bricco&charge charging station
The optimal solution for
DC Connector
CCS-Type2, IEC62196-3
DC Charging Power
250kW@850V/150kW@500V
DC Safety
Short-circuit protection, overcurrent protection, overvoltage protection, undervoltage protection, insulation monitoring, grounding monitoring
DC Output Current
300A
DC Cooling Charging Cable
CCS 235mm2 air cooled
150A CCS 250mm2 200 A
The bricco&charge and correct&charge system is realized CCS 2100mm2 300 A
DC Output Voltage
150-920VDC in our development and production facility in
DC Input Current
300A, HV+, HV- 2x HV+, 2x HV- Kriens-Obernau. In terms of safety and quality, the product each max. 150mm2 cable permissible voltage drop at the source 3V
AC Network Connection
L, N, PE, 230V-10%, 50/60Hz
AC Input Current
6A acquired in these special applications. The charging solution
Combined Charging System
DIN70121, ISO15118, Plug IEC62196-3
(CCS2) has been proven and tested for daily use in
Output Variants
1in1: CCS2 other variants on request confined spaces and can be accessed by us via remote maintenance. On request, it can be maintained on
Cable of the charger
Cable length adjustable from 2m to 9m
Screen/HMI
RGB status indicator with 10 segments
Battery level and real-time charge state
Communication/Interfaces
OCPP1.5, OCPP1.6, OCPP2.0 (ready), JSON/SOAP,
Ethernet port, GPRS, UMTS, LTE
Environment/Vandalism
IP54 and IK10
Operating temperature from -20°C to +45°C
Storage from -40°C to +85°C with RF from 5% to 95% (non-condensing)
Maximum noise level
50dB(A) at 1m
EMC
EN61000-6-1,-2,-3,-4; EN62311; EN301489-1,-3,-17,-52;
EN300220; EN300328; EN300330
Compliance
EN61851-1,-23
Overvoltage
Check supply to ensure on-site
Efficiency
99.5%
- Up to 100 meters from the charging plug to the electrical panel
Mounting
Ceiling mounting
Wall mounting
- Clearly visible indicator of charge level and status
Dimensions (WxLxH)
253x446x600mm (dimensions without cable management)
Weight
25kg
- Compatible with the network
Mounting height above sea level
2000m
Power unit compatible with correct&charge, correct&charge6
EVTEC AG
Phone: +41 41 260 88 38
E-Mail: evtec@evtec.ch
Web: www.evtec.ch
moka correct system bricco correct system confined&charge cappuccino&charge move&charge
Up to 384 kW DC of
2x DC charging power
High power charger
100kW DC, including
Plug&play charging 20kW DC charging power from 192 kW with electronics up to 384kW DC and dynamic distribution of
+ 22kW AC. Available
Power electronics for load, charging up to three as a 1000 V variant with separate user unit applications in fleets.
920V. Charges up to 3 vehicles simultaneously with all DC connectors. Extremely compact.
The most flexible arrangement of power terminals
The housing of the distribution terminal has been developed for ceiling mounting; the detection and distribution of this charging solution derives from the requirements of bus and truck garages. Due to the close arrangement of parking spaces, the space for charging columns is reduced, but the battery charge state detection of the connected battery is large and clearly visible from afar. The release functions on the distribution terminal exploit the longer parking time to charge the vehicles, meaning that charging starts automatically after plugging in without having to designate specific charging spaces. The distribution terminal is placed above the vehicles; the power technology is located in a technical room not reserved for parking.
If additional operational guidance is desired, a connected computer or a screen control device can be used.
Charging solution for
Bus, truck, or car parking
This means the solution is also useful for fleets of cars that need to be charged quickly in confined parking situations, especially in underground garages or other spatial situations that do not offer enough space for additional fast charging stations, as is usually the case with public charging stations.
At the
- industrial
Bricco-Correct-System tria
The parts of the bricco&charge housing comply with industrial standards, are easily accessible and repairable or, in case of accidents or damage, also easily replaceable. The interconnection of up to two bricco&charge distribution terminals with a correct&charge electrical panel allows a power of up to
2x 192kW and charging voltages from 200 to 920V.
CCS
CHAdeMO
Type 2
Connector
Plug
Plug
Socket (optional)
bricco&charge charging station
The optimal solution for
DC Connector
CCS-Type2, IEC62196-3
DC Charging Power
250kW@850V/150kW@500V
DC Safety
Short-circuit protection, overcurrent protection, overvoltage protection, undervoltage protection, insulation monitoring, grounding monitoring
DC Output Current
300A
DC Cooling Charging Cable
CCS 235mm2 air cooled
150A CCS 250mm2 200 A
The bricco&charge and correct&charge system is realized CCS 2100mm2 300 A
DC Output Voltage
150-920VDC in our development and production facility in
DC Input Current
300A, HV+, HV- 2x HV+, 2x HV- Kriens-Obernau. In terms of safety and quality, the product each max. 150mm2 cable permissible voltage drop at the source 3V
AC Network Connection
L, N, PE, 230V-10%, 50/60Hz
AC Input Current
6A acquired in these special applications. The charging solution
Combined Charging System
DIN70121, ISO15118, Plug IEC62196-3
(CCS2) has been proven and tested for daily use in
Output Variants
1in1: CCS2 other variants on request confined spaces and can be accessed by us via remote maintenance. On request, it can be maintained on
Cable of the charger
Cable length adjustable from 2m to 9m
Screen/HMI
RGB status indicator with 10 segments
Battery level and real-time charge state
Communication/Interfaces
OCPP1.5, OCPP1.6, OCPP2.0 (ready), JSON/SOAP,
Ethernet port, GPRS, UMTS, LTE
Environment/Vandalism
IP54 and IK10
Operating temperature from -20°C to +45°C
Storage from -40°C to +85°C with RF from 5% to 95% (non-condensing)
Maximum noise level
50dB(A) at 1m
EMC
EN61000-6-1,-2,-3,-4; EN62311; EN301489-1,-3,-17,-52;
EN300220; EN300328; EN300330
Compliance
EN61851-1,-23
Overvoltage
Check supply to ensure on-site
Efficiency
99.5%
- Up to 100 meters from the charging plug to the electrical panel
Mounting
Ceiling mounting
Wall mounting
- Clearly visible indicator of charge level and status
Dimensions (WxLxH)
253x446x600mm (dimensions without cable management)
Weight
25kg
- Compatible with the network
Mounting height above sea level
2000m
Power unit compatible with correct&charge, correct&charge6
EVTEC AG
Phone: +41 41 260 88 38
E-Mail: evtec@evtec.ch
Web: www.evtec.ch
moka correct system bricco correct system confined&charge cappuccino&charge move&charge
Up to 384 kW DC of
2x DC charging power
High power charger
100kW DC, including
Plug&play charging 20kW DC charging power from 192 kW with electronics up to 384kW DC and dynamic distribution of
+ 22kW AC. Available
Power electronics for load, charging up to three as a 1000 V variant with separate user unit applications in fleets.
920V. Charges up to 3 vehicles simultaneously with all DC connectors. Extremely compact.
